BK10 2000 LUMENS is specifically designed to be the safety light more bright according to the standard STVZO.
To be equipped with XHP35 HI LED, powered by the latest 21700 cells with a capacity super high 5100mAh, this stunning illuminator can emit up to a brightness of 2000 lumens. The optical lens PMMA makes the point of beam with high efficiency of light, to be eligible for the last requirement of point international. The stain rectangular not only illuminates all the travel, but that also focuses the beam on the road to prevent glare for pedestrians and approaching drivers will be safe. The single button allows for easy and intuitive operation to pass by any output; function Micro-USB in the back is for a quick recharge and convenient. The protection with IP66 rating ensures BK10 with resistance to rain and dust.
1 * CREE® XHP35 high-intensity
LED: 1xCree XHP35 HI LED with a lifespan of 50,000 hours
Max. emits 2000 lumens using 1x21700 5100mAh battery
Ultra-Low: 30 lms; 37 hours; 370cd; 38mm
Low: 150 lms; 15.6 hours; 1720cd; 82m
Med: 350 lms; 6.2 hours; 3770cd; 122m
Height: 1050 lms; 1 hour 35 minutes; 10350cd; 220mm
Turbo: 2000 ~ 1050 lms; 2.5 minutes ~ 1.5 hours; 21000cd; 289m
Strobe light: 1050 lms; 3.5 hours
SOS: 1050 lms; 3 hours
Max. run-time: 37 hours
Max. Distance of beam: 289 meters.
Maximum intensity of the beam: 21000cd
Size: 117.2 mm x 45mm x 28.4 mm
Weight: 110g without battery; 182g w / battery
BK10 is designed in accordance with the standard STVZO
Optical lens PMMA
Point of rectangular beam
Structure of body of aircraft grade aluminum
Finish antiabrasivo hard-anodized premium type III
Mode strobe for tactical use of emergency
Aerodynamic design of the body
Compact size for ease of transportation
Micro USB rechargeable
A switch for easy operation
Protection IP66 for resistance to rain and dust.
Impact resistance: 1.5 meters.
Includes mat detachable rubber of high quality to improve the shock resistance
Circuit board design intelligent highly efficient to the max. performance and a lot of time
The flashlight of the bicycle, the BK10 is equipped with a controller of the digital stabilisation of brightness in all modes of operation, which are regulated by a button at the top of the lantern. To avoid overheating of the crystal LED, the flashlight has a temperature control system internal smart, when the temperature in the glass reaches 65 degrees, the torch automatically lowers the brightness to an acceptable value.
The package includes: a charger of high speed from the micro USB port and a new battery, Acebeam 21700 Li-ion battery with a capacity of 5100 mAh, which provides more than 90 hours of work in the mode of operation minimum. The new format of the battery 21700 is very popular, has a number of advantages over the type of 18650 battery, all are accustomed to. It has a power capacity of 300 watts per 1 kg of battery, and the 18650 is only 250 watts per 1 kg, it can also work at low and high temperatures-critical -30 to +80, in contrast with 18650, which operates from -20 To +50 degrees Celsius.
It is recommended to use batteries of high current (discharge current is 20 A. or more).
The quick charging of the battery through the micro USB port is 4-5 hours, the indication green battery indicates it is charged, red is charging.
The indication of battery charge will be alerted about the need to charge the battery.
The battery compartment is spring-loaded, protects the internal electronics against damage when driving in irregular areas.
Radiator fins on the head for the effective removal of heat from the LED.
The body of the flashlight is made of aircraft-grade aluminum T6061-T6 with hard-anodized of the third degree (maximum)
Standard protection against bumps FL1 Standart (falls from a height of 1.2 metres).
Improves the water tightness of the hull according to the standard IPX-8 (diving under the water for no more than 2 meters for 30 minutes).
Length, mm: 117.2
Head diameter, mm: 45
Case diameter, mm: 28,4
Weight without battery, g: 105
The battery weight, g: 105 g
Green - burden> 30%
Red - load <30%
Flashing red - charge <10%
Package (see photo):
Lamp of cycle Acebeam BK10
battery IMR 21700 5100 mAh 18.9 Wh
Charging cable - USB Type-C
Spare O-rings and button rubber
Adapter for 18650
Modes of operation:
Turbo: 2000 ~ 1050 lumens: 2.5 minutes + 1.5 hours (289 meters)
Height: 1050 lumens - 1 hour 35 minutes (220 metres)
Med: 350 lumens - 6.2 hours (122 meters)
Low: 150 lumens - 15.6 hours (82 meters)
Ultra-low: 30 lumens - 37 hour (38 meters)
Strobe light: 1050 lumens - 3.5 hours
Before using, remove the film insulation between the battery and the cover of the rear end.
The on and off of the flashlight is performed by pressing the complete button located at the head.
The modes switching is performed by pressing and holding the button located on the side of the head of the lamp, incl. mode The modes are changed in a circle: Ultra Low, minimum, medium and maximum.
The mode Strobe is activated with a button on the side with a triple-click on any state.
The Turbo mode is activated with a button on the side by double-clicking on any state.
The lock of the flashlight is activated with a button on the side; keep the power off to turn it off. states for more than 3 seconds until the lamp turns on in the mode of Ultra-low, after which it flashes 3 times. The unlocking is performed in t.
LED flashlight front Powerful and cheap ACEBEAM H40 LED Type XP-L 1000lm can work with battery lithium 14500 or with normal aa batteries, type AA. Operating time up to 52 Hours
We accept orders by the following methods:
Online (secure): browse our range and add products to your basket.
Offline: please see the contact us page for telephone, fax, and email details (you can change your country by clicking on the link at the top of the page). Shipping prices vary across our product range and can be viewed for each product on the product datasheet by choosing the country you are in.
Express international delivery & worldwide shipping.
All in-stock orders received Monday through Fridays are shipped the same day. For customers in Europe, the deadline for same day dispatch is 16:00pm. Orders received after these deadlines are shipped the next business day. You can check availability by viewing the datasheet which will display a yellow check mark if the product is in stock availability check mark.
Quality is important to Siliceo online Therefore if a product does not perform as described on the datasheet please notify us within 24 months of delivery using the contact form and our dedicated team of scientific experts will examine details of your protocol to determine whether the problem is protocol related or product related.
All payment details are described on the invoice that you will receive after your order is dispatched. The invoice will be sent to the billing address you specify and this can be different to the delivery address for the products.
We accept PayPal, credit card, cash on delivery, bank and wire transfer as methods of payment, for further details please contact us.