Complete kit for long distance WiFI connection. - Easy and very powerful configuration.
The SILICEO Long Range WiFi Bridge System is the best way to connect two buildings to the same network wirelessly up to 5 kilometers apart. This system is very easy to configure.
The kit has everything included to install two identical antennas, one on each side, so that one works as a transmitter and the other as a receiver. It is as easy as installing one to an ethernet cable router and it will start broadcasting while the other on the other side, up to 5km away, will receive the connection via WiFI to transmit it directly to a PC or another repeater router.
The work is done by the Alfa Tube2h model bridge that connects to the 24DBI GRID parabolic antenna that is placed on the wall or roof. The connection cables are also included in the kit. Simply connect the antennas to each side of the bridge, at each location, and connect them to the Tube2h bridge with the included antenna coaxial cable.
In this kit, the largest ones for WiFi available on the market are used, each one is 1 meter long and is made of mesh to resist the wind. They are 2.4gz antennas, which is the frequency that supports the longest distance. The 24DBI GRID antennas are for point-to-point connections for long distances.
*** Important note: It is mandatory to have a direct line of sight between the two antennas. No buildings, no walls, no obstructions between both antennas for better reception. LED lights on each bridge device make it easy to align your antennas.
- Requires direct line of sight between two points (no obstructions, not even a tree or small wall)
- It must be at a maximum distance of 5Km
- The antenna should be mounted outdoors at approximately ceiling height at each location
- You must have an ADSL router or other Internet service on the sending side
- If you are not sure of the needs of your system, contact the SILÍCEO store by email, telephone or WhatsApp and a specialist will recommend the most appropriate equipment for each case.
- These equipment can be extended with an Rj45 Ethernet cable of up to 60 meters, (In the box there is only a 1m cable for installation, if you need more cable you can buy it separately)
Alfa Network Alfa GriD 24dBi antennas are professional WIFI antennas with great quality. Always at a fairly cheap price and high power. This grid antenna is designed for the 2.4GHz frequency giving excellent performance within the standards of WiFi iEEE 802.11b / g and thus achieving the maximum distance that a WiFi antenna can currently reach.
Resistant to external conditions
includes pole mount
It works in the frequency of 2.4GHz and 2.483GHz
Follow IEEE 802.11b, 802.11g, 802.11n wireless LAN standards
Directional and multipoint
Works as an Access Point or as a WiFi client
You will need to connect the first half of the WiFi bridge, using the Ethernet cable, to an empty LAN port on your router. The wireless bridge then causes the encrypted Internet signal to be transmitted to its second location wirelessly. The second half of the system is terminated with an Ethernet cable that provides Internet and network connectivity to a computer or other device, such as a WiFi router or repeater. You will need electrical power supplied by a 220v socket at both locations to power the bridge.
The signal between the two points of the WiFi Bridge system is strongly encrypted for greater security. The cost of the WiFi Bridge system is a fraction of the most expensive proprietary systems. Provides up to 150 Mbps of throughput, which is faster than most Internet service provider download speeds. (Depending on the environment, the speed can range from 30 Mbps minimum to 150Mbps maximum.
This Kit can be used at greater distances of up to 10 km, but the speed may drop below 30Mbps depending on environmental conditions and interference.
Up to 60 meters of low-cost Cat-5e or Cat-6 Ethernet cable (not included) can be used to mount the antenna even further on top of a tree or tower.
Important SILÍCEO recommends the following antennas with the long-range WiFi bridge system, point-to-point WiFi antenna, 24dBi outdoor 2.4GHz WiFi antenna. It is possible to use antennas of another type or of less dBi but the maximum distance would be much less
This kit is designed to connect to a router configured using Dynamic Host Configuration Protocol (DHCP), which is the standard factory setting for most routers. An internet connection is also required.
The 5km WiFi kit includes:
2 REAL 24DBI GRID parabolic antennas and guaranteed
2 Bridges WiFi bridge TUBE2H
2 POE power supplies with 220V plug
2 1m Ethernet cable
This extraordinary WiFi router Alfa is designed with a compatible USB port for WiFi antenna powerful USB. Works with all models specified in the characteristics as the famous antennas powerful Alfa AWUS036NHR and Alfa AWUS036NHV. You can work as a repeater of wireless internet at a great distance.
We accept orders by the following methods:
Online (secure): browse our range and add products to your basket.
Offline: please see the contact us page for telephone, fax, and email details (you can change your country by clicking on the link at the top of the page). Shipping prices vary across our product range and can be viewed for each product on the product datasheet by choosing the country you are in.
Express international delivery & worldwide shipping.
All in-stock orders received Monday through Fridays are shipped the same day. For customers in Europe, the deadline for same day dispatch is 16:00pm. Orders received after these deadlines are shipped the next business day. You can check availability by viewing the datasheet which will display a yellow check mark if the product is in stock availability check mark.
Quality is important to Siliceo online Therefore if a product does not perform as described on the datasheet please notify us within 24 months of delivery using the contact form and our dedicated team of scientific experts will examine details of your protocol to determine whether the problem is protocol related or product related.
All payment details are described on the invoice that you will receive after your order is dispatched. The invoice will be sent to the billing address you specify and this can be different to the delivery address for the products.
We accept PayPal, credit card, cash on delivery, bank and wire transfer as methods of payment, for further details please contact us.