Kit composed by two units of Ubiquiti LocoM2. Placed one on each side dle link. One can make a transmitter and the other receiver WIFI: a complete Kit for Wifi Connection between two distant points. the units CPE Ubiquiti Nanostation Loco M2 are the most effective and easy to configure.
Warning: Last items in stock!
The Kit final and full Wifi Connection between two distant points. the units CPE Ubiquiti Nanostation Loco M2 are each CPE that operate as receiving antennas for WIFI and can work as router repeater WIFI. With their Panel antennas directional 8dBi reach more than 2 km away with direct view to each other. This complete Kit of 2 NanoStation Ubiquiti LocoM2 has everything you need to carry the internet from one home to another, with direct vision. No matter the distance always that you have direct vision between these two stations and CPE.
Products Ubiquiti are designed for all those who want to interconnect two homes or premises and the sharing of data, Internet connection, etc., The high compatibility of these equipment Ubiquiti makes them ideal in pairs.
Applications of this kit are:
• Communicate with the WIFI network of a local business with the particular home
• Interconnect two private houses, two WIFI networks do premises or buildings of a same enterprise or company.
• 2 x NanoStation LOCO M2
• 2 x extension cables RJ45 Ethernet network of 5 meters.
Instructions basic to put in place the kit Ubiquiti NanoStation x 2:
One of the CPE Ubiquiti is configured as an Access point AP and is connected by network cable to the output LAN to the router that have internet.
The other CPE Ubiquiti is configured as a Client or repeater, WIFI and connects by LAN cable to a computer to configure it with the data of the WIFI network and password. In the repeater mode in addition to the internet by cable repeats with a new network WIFI. After connected, you can install a swicht to connect more LAN cables or WIFI router to repeat internet with the new WI-fi networks.
In the end, you'll have a system that will allow you to have Wifi in the house sharing the connection to another home or local.
Once you get the connection to the internet, it is possible to install easily a router repeater WIFI that creates a new network with new password, to connect with several computers, mobile phones, tablets, or other devices that support the Wifi technology. See the section on repeater WIFI plug.
Antenna WISP to CPE client and repeater wifi. The receiver of the external can be configured as a wifi client to repeat the internet. Wifi antenna with a range up to 15km point-to-point 2.4 GHz. Router exterior Ubiquiti complete, all of a station CPE to function as router, client and repeater WIFI.
WISP (Wireless Internet Service Provider) is the new technology devices that work as service providers of Wireless Internet. WISP refers to Wifi hotspots, an operator with an infrastructure Wifi or WiMAX. Systems WISP Ubiquiti Network or WISP ubnt offer the highest quality and guarantee compatibility with Airmax.
The technology WISP with firmware airOS® versatile Ubiquiti allows high-performance, networking, multi-point outdoor. AirOS provides features such as wireless configuration, settings bridge or router and system administration services.
Nanostation LocoM2 low price and high performance, with wifi antenna 8dbi and RJ45 cable PoE
The router Ubiquiti LocoM2 can function as an antenna for wifi receiving for solutions, WISP internet, as roputer wifi client, as a repeater, and wifi as an access Point or infrastructure. It is more than just a router, The Ubiquiti NanoStation M2 is the ultimate solution for WISP and to bind internet between buildings far with total stability and speed of transmission.
Ubiquiti NanoStation LOCO M2 P. Access Ext. PoE 24v. The CPE Ubiquiti NanoStation Loco M2 is a team for outdoor use, very compact, which includes 2 antennae (MIMO) to 8 dBi gain for the 2.4 GHz band. The speed of the actual transfer of the equipment is up to 150 Mbps.
Advanced Technology of Software
The technology airMAX®, Ubiquiti is proven in millions of deployments around the world, consiguiendoo exceptional performance in outdoor environments. The protocol TDMA AirMax enables unprecedented scalability, high throughput and low latency in the networks multipoint.OCon the advantage of the high transfer speed of the standard 802.11 n, thanks to the technology TDMA Time Division Multiplexing, allows you to connect to more than 300 clients to the team. This model has a low latency. In comparison with the predecessors Nanostation M, the Nano Loco M2 has a processor with higher clock frequency of 400 MHz and more memory Flash and RAM. Nano Loco M2 is an access point (AP) ACCESS with great reliability and performance, pair professional users. Offers a range of up to 15 miles in Ideal conditions with 150 Mbps of bandwidth, easy to set up with the tool AIROS Ubiquiti.
Nanostation antenna internet wifi, WISP CPE, WISP outdoor
The Access Point waterproof for outdoor Ubiquiti NanoStation M2 Loco is a Access Point Client (AP and CPE) low price designed to be installed in any home or office, it is light and durable, and includes everything needed for installation. It is perfectly compatible with the standard 802.11 N in 2.4 GHz and is easily installed.
Network interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Range: Up to 15Km depending on the WISP, and interference from the environment.
Range/Throughput: Up To 150+Mbps @ 5+Km
Antenna: directional Antenna integrated 2X2 Mimo 8 dBi
Power supply: 24V 0.5 A injector included PoE Active
Type of supply: POE (pairs 4,5+; 7,8 return)
Working temperature: -20C to +70C
Weight: 0.2 kg
Ubiquiti Model NanoStation locoM” FCC ID: SWX-M2L / IC: 6545ª-M2L
Features Dimensions: 163 x 31 x 80 mm
Weight: 180 g
Operation mode: AP, Client, WDS
Frequency: 2400 - 2486 MHz
Transmission speed: up to 150 Mbps
WiFi standard: 802.11 b/g/n
Chipset: Atheros MIPS 24KC, 400Mhz
Max. output power: 23 dBm
Sensitivity: -96 dBm
Modulation: OFDM, DBPSK, DQPSK, CCK, 64QAM,16QAM
Encryption: WEP, WPA, WPA2
Certifications: FCC, CE
LAN port: 1x RJ45 10/100 Mbps
Power supply: (PoE Injector Passive) 24 V, 0.5 A
Operating temperature: from -30°C up to +80°C
Interface: LAN, WiFI
Supported Operating system: AirOS V
- Built-In Antenna
Gain: 8 dBi
Polarization: Linear - horizontal and vertical
Width of Beam H-pol: 60°/60°
Beamwidth V-pol: 60°/60°
Processor: MIPS 24KC, 400 MHz
RAM: 32 MB
NAND Flash: 8 MB
Other Features -Range: Up To 15 Km
-Band work: 2.4 GHz
Revision date 29-05-2013 porJAV
+ x 2
This disk parabolic reflector WIFI is specially designed for CPE WIFI external marks Alpha and Ubiquiti modleos N2, N5, Ubiquiti Nano, Ubiquiti Loco
UBIQUITI NS-WM-mounting Kit Wall or Window For Nanostation NS2 and NS5This installation kit allows you to install the Nanostation both the wall and the window, in a solid form and safely.
Full router NanoStation loco M2. This CPE of the prestigious brand Ubiquiti combines all the functions of a WIFI antenna panel of long-range and a router. All integrated in a waterproof housing and with power cable RJ-45 with PoE adapter 24v. Scope guaranteed by the mark of more than 5km outside.
We accept orders by the following methods:
Online (secure): browse our range and add products to your basket.
Offline: please see the contact us page for telephone, fax, and email details (you can change your country by clicking on the link at the top of the page). Shipping prices vary across our product range and can be viewed for each product on the product datasheet by choosing the country you are in.
Express international delivery & worldwide shipping.
All in-stock orders received Monday through Fridays are shipped the same day. For customers in Europe, the deadline for same day dispatch is 16:00pm. Orders received after these deadlines are shipped the next business day. You can check availability by viewing the datasheet which will display a yellow check mark if the product is in stock availability check mark.
Quality is important to Siliceo online Therefore if a product does not perform as described on the datasheet please notify us within 24 months of delivery using the contact form and our dedicated team of scientific experts will examine details of your protocol to determine whether the problem is protocol related or product related.
All payment details are described on the invoice that you will receive after your order is dispatched. The invoice will be sent to the billing address you specify and this can be different to the delivery address for the products.
We accept PayPal, credit card, cash on delivery, bank and wire transfer as methods of payment, for further details please contact us.