GPS for android tablet micro USB Globalsat SIRF-IV 353 cable

GPS+ USB cable 1.5 meters + adapter micro-USB for tablet

This GPS USB is specially designed for sharing on both computers or laptops with a USB connection to tablet with micro USB.

The kit includes the antenna, GPS receiver Globalsat BU-353-S4 which receives the signal from the satellite with the prestigious chip Sirf IV, G-STAR IV. Thanks to the connector adapter of microUSB-to-USB may also be installed on any Android tablet (3 / 4/5), Linux, MAC or Windows. It is also useful for smartPhone if you're looking to improve and get greater accuracy thanks to its external antenna is waterproof.

Can be installed in Boats, Cars, Motorcycles. etc with your outside antenna with magnetic mount and suction cup. GPS For android tablet micro USB Globalsat SIRF-IV 353 cable waterproof for outdoor use, designed to last, extra support and suction cup for fixing to glass or metal.

GLOBALSAT GPS BU-353-S4 + micro-USB host OTG adapter antenna cable to tablet and laptop

WINDOWS - LINUX -MAC - Android (5.6 or lower)

•  FOR VEHICLE, BOAT, AIRCRAFT, MOTORCYCLE ETC.
• ANTENNA FULLY WATERPROOF - FOR OUTDOOR
• MAGNETIC BASE STRONG GRIP - TO ROOF OF CAR
• USB CABLE 1.5 m PLUG & PLAY CHIP PL2303 SERIAL USB
• Adapter USB to micro USB host and OTG
• RECEIVER CHIP IS THE LATEST MODEL SIRF STAR IV G-STAR-IV

WORKS WITH ALL OPERATING SYSTEMS

WINDOWS XP, Vista system (32-64)，win7 operate system (32-64) WINDOWS 8，Mac OS system. Linux, ANDROID
(EXPERIMENTALLY TESTED ON ANDROID VERSIONS FROM 2.3 TO 7.0)

The GPS receiver BU-353-S4 IS THE LATEST MODEL OF GPS RECEIVER. FOR VEHICLE, BOAT, AIRCRAFT, MOTORCYCLE ETC. Chip Prolific PL2303 compatible cvon WAAS is magnetic and waterproof with a non-slip base. Has the latest GPS chipset SiRF Star IV, and with a patch antenna for a better signal precision. Their applications include and are not limited to, marine, aerial, and commercial, fire trucks, police cars, buses, utility vehicles and the long-distance transport. The cable is long 1.5 m and has a USB connector on its end to connect with a laptop computer / ibook. / PowerBook. COMPATIBLE ALL WINDOWS XP VISTA / WIN 7 / WIN 8 / LINUX / MAC

PC, LAPTOP, TABLET OR NETBOOK BU-353-S4 replaces BU-353 and BU-507 BU-500

* ADAPTER USB GPS TO NAVIGATE ON-SCREEN

Characteristics Electrical Characteristics (Receiver)
Chipset GPS: SiRF STAR IV GSD4e
Frequency: L1, 1575.42 MHZ
C / A code: speed of chip 1.023 MHz
Channels: 48
Sensitivity: -163dBm
Accuracy
Velocity : 0.1m/sec 95% (SA off),">Horizontal position: <2.5 m 2d = "" rms = "" sbas = "" enable = "" br = ""> Speed: 0.1 m / sec 95% (SA off),
Time: 1 micro-second synchronized with the time of the GPS
WAAS: enabled for products of North America (USGlobalSat, Inc)
Datum: WGS-84
Acquisition rate hot Start: 8 sec., Average
Warm start: 35 sec., Average
Cold start: 35 sec., Average
Remapping: 0.1 sec. average
Protocol Protocol GPS Default: NMEA 0183 (Secondary: SiRF binary) SiRF binary >> position, velocity, altitude, status and control
NMEA 0183 protocol MEA0183 V3.0 and supports
Output data GPS: command GGA, GSA, GSV, RMC, VTG, GLL v2.2 (VTG and GLL are optional)
Speed of transfer of GPS: settings of the software command (default: 4800, n, 8,1 for NMEA)
Dynamic acceleration of the condition: limit less than 4g
Altitude limit: 18,000 meters (60,000 feet) max.
Speed limit: 515 meters / sec. (1,000 knots) max.
Jerk Limit: 20 m / sec ** 3
Operating temperature: -40 ° ~ 80 ° C
Storage: -40 ° ~ 85 ° C
Humidity: up to 95% non-condensing
Voltage of power: 5V ± 5%
Current: 60mA typical
Physical characteristics
Dimension: 2.32 "x 1.65" x 0.82 "(59mm x 47 mm x 21 mm)
USB cable length: 60 "(152 cm)
Amplifier low noise Amplifier Gain w / out cable: 27 dB Typical
Filtering: -25dB (+100 MHz)
VSWR output: 2.0 max.
Voltage: DC 3 ~ 5.0 V
Current: 15mA max @ 5VDC

Globalsat BU-353 S4 (SiRF Star IV)
USB GPS Receiver - Wnindows Linux MAC Android

 MANUAL FOR INSTALLATION OF ADAPTER USB GPS ANDROID

This manual serves for the installation of all Models of GPS receivers USB of the brands SILICON® and Glogalsat ® that work with Chip PL2303

INSTALL USB GPS ANDROID

BU-353 SILICON

We NEED to:

- ANDROID TABLET WITH PERMISSIONS (does not need ROOT permissions) WITH A USB HOST PORT. Also works with micro-USB port on the Host.

- ADAPTER USB GPS SILICON or ND-105C / BU-353 with chip Prolific PL2303 USB-serial UART GPS

- VALID FOR ALL VERSIONS OF ANDROID FROM 2.3 to 7.0

Solution driver Android PL2303

Prolific provides a solution driver API USB host Android (permission is NOT needed for root) for connecting devices that are USB-to-serial PL2303 devices with Android support mode API USB host. The library of drivers PL2303 Android JAVA allows customers and developers to write Android applications to interface their devices PL2303 RS-232 / UART with millions of devices USB host Android as smartphones, tablets, and smart tvs.
 
 
Requirements:
- USB device controller chip PL2303GC, PL2303GS, PL2303GT, PL2303GL, PL2303GE
- Android device (tablet / phones) with support host mode USB
- Android 3.2 and higher versions of the operating system (compatible with Android 5.0, 6.0, 7.0)

This link is the Android APP that runs the GPS by Serial port Prolific Pl2303 on android devices descargaló and check that your android device is compatible:
https://play.google.com/store/apps/details?id=tw.com.prolific.app.pl2303terminal&hl=en

*** Remember that the data read situandolo in a space open to the sky. When the GPS reads data, the led flashes indicating that we have more than 4 satellites are available.

** if you turn off GPS the next time you read in dev/bus/usb/001/002 ...

* To simplify the start you can configure the application in automatic mode to start in as soon as you plug in the GPS USB

****To ENJOY OUR GPS WITH ALL KIND OF MAPS.. TESTED WITH SYGIC AURA APK / EARTH / MAPS etc****